Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show ces clock-select
VR-690
Cisco IOS Voice, Video, Fax Command Reference
show ces clock-select
To display the setting of the network clock for the specified port, use the show ces clock-select command
in privileged EXEC mode.
show ces slot/port clock-select
Syntax Description
Command Modes Privileged EXEC
Command History
Examples The following is sample output from the show ces clock-select command for slot 1, port 0:
Router# show ces 1/0 clock-select
Priority 1 clock source:not configured
Priority 2 clock source:not configured
Priority 3 clock source:ATM1/0 UP
Priority 4 clock source:Local oscillator
Current clock source:ATM1/0, priority:3
Related Commands
slot Backplane slot number.
/port Interface port number. The slash must be entered.
Release Modification
12.1(2)T This command was introduced on the Cisco 3600 series router.
Command Description
clock-select Establishes the sources and priorities of the requisite clocking signals for the
OC-3/STM-1 ATM Circuit Emulation Service network module.