Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show ss7 mtp2 state
VR-799
Cisco IOS Voice, Video, Fax Command Reference
MTP2AERM Indicates the status of the
alignment error rate monitor
state machine (AERM).
IDLE—The state machine is inactive.
MONITORING—Alignment error
monitor is active. This is part of the
alignment process.
MTP2CONGESTION Indicates the status of the
congestion control state
machine.
IDLE—The state machine is inactive.
No congestion is detected; normal
traffic flow.
ACTIVE—Congestion has been
declared. The Cisco 2600 series router
is sending SIBs every T5, which
indicates that the remote end should
stop sending new MSUs until the local
Cisco 2600 series router can catch up.
Congestion Backhaul Indicates congestion status of the
backhaul link between the Cisco
SLT and the Media Gateway
Controller.
Abate—The link between the
Cisco 2600 series router and the Media
Gateway Controller is not under
congestion.
Onset—The link between the
Cisco 2600 series router and the Media
Gateway Controller is under
congestion. and the Media Gateway
Controller should stop sending new
MSUs until the local Cisco 2600 series
router can catch up.
Remote Processor
Outage
Indicates the processor outage
status of the remote.
TRUE indicates that the remote is in
processor outage.
FALSE indicates that the remote has
not declared processor outage.
Table 56 SS7 MTP 2 State Information Fields (continued)
State Description Possible Values