Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show gatekeeper servers
VR-729
Cisco IOS Voice, Video, Fax Command Reference
show gatekeeper servers
To see a list of currently registered and statically configured triggers on this gatekeeper router, enter the
show gatekeeper servers command in EXEC mode.
show gatekeeper servers [gkid]
Syntax Description
Command Modes EXEC
Command History
Usage Guidelines Enter this command to show all server triggers (whether dynamically registered from the external servers
or statically configured from the command line interface) on this gatekeeper. If gkid is specified, only
triggers applied to the specified gatekeeper zone appear. If the gkid argument is not specified, server
triggers for all local gatekeeper zones on this router appear.
Examples This example shows the operating information of the specified gk102 server:
Router# show gatekeeper servers gk102
GATEKEEPER SERVERS STATUS
=========================
Gatekeeper Server listening port:20000
Gatekeeper-ID:gk102
--------------------
RRQ Priority:1
Server-ID:sj-server
Server IP address:1.14.93.28:42387
Server type:dynamically registered
Connection Status:active
Trigger Information:
Supported Prefix:10#
Supported Prefix:3#
RRQ Priority:2
Server-ID:sf-server
Server IP address:1.14.93.43:3820
Server type:CLI-configured
Connection Status:inactive
Trigger Information:
Endpoint-type:MCU
Endpoint-type:VOIP-GW
Supported Prefix:99#
gkid (Optional) The local gatekeeper name to which this trigger applies.
Release Modification
12.1(1)T This command was introduced on the Cisco 2500 series, Cisco 2600
series, Cisco 3600 series, and Cisco 7200 series routers and on the
Cisco MC3810 multiservice concentrator.