Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show dial-peer voice
VR-709
Cisco IOS Voice, Video, Fax Command Reference
show dial-peer voice
To display configuration information for dial peers, use the show dial-peer voice command in privileged
EXEC mode.
show dial-peer voice [number] [summary]
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use the show dial-peer voice privileged EXEC command to display the configuration for all Voice over
IP (VoIP) and plain old telephone service (POTS) dial peers configured for the router. To show
configuration information for only one specific dial peer, use the argument number to identify the dial
peer.
Examples The following is sample output from the show dial-peer voice command for a POTS dial peer:
Router# show dial-peer voice 1
VoiceEncapPeer1
tag = 1, dest-pat = `+14085291000',
answer-address = `',
group = 0, Admin state is up, Operation state is down
Permission is Both,
type = pots, prefix = `',
session-target = `', voice port =
Connect Time = 0, Charged Units = 0
number (Optional) A specific dial peer. This option displays configuration
information for a single dial peer identified by the number argument.
Valid entries are any integers that identify a specific dial peer, from 1 to
32767.
summary (Optional) Displays a summary of all voice dial peers.
Release Modification
11.3(1)T This command was introduced.
11.3(1)MA The summary keyword was added for the Cisco MC3810 multiservice
concentrator.
12.0(3)XG This command was modified to support Voice over Frame Relay (VoFR)
for the Cisco 2600 series and Cisco 3600 series routers.
12.0(4)T Support was added for VoFR for the Cisco 7200 series routers.
12.1(3)T This command was modified for Modem Passthrough over Voice over IP
on the Cisco AS5300 universal access server.