Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
server trigger
VR-598
Cisco IOS Voice, Video, Fax Command Reference
In LCF submode, enter the following syntax:
server trigger lcf gkid priority server-id server-ipaddress server-port
In LRJ submode, enter the following syntax:
server trigger lrj gkid priority server-id server-ipaddress server-port
In LRQ submode, enter the following syntax:
server trigger lrq gkid priority server-id server-ipaddress server-port
In RRQ submode, enter the following syntax:
server trigger rrq gkid priority server-id server-ipaddress server-port
In URQ submode, enter the following syntax:
server trigger urq gkid priority server-id server-ipaddress server-port
The following options are available in all submodes:
The destination-info argument is under the ARQ, LRQ, LCF, and LRJ submode and has the following
options:
The redirect-reason argument is under the ARQ and LRQ submodes and has the following options:
info-only Information only—no need to wait for acknowledgment.
shutdown Enter this subcommand to temporarily disable a trigger. The gatekeeper does
not consult triggers in a shutdown state when determining what message to
forward.
destination-info Configure destination-info to trigger one of the following conditions:
e164
email-id
h323-id
word
Configure an E.164 pattern.
Configure an email ID.
Configure an H.323 ID.
When configuring the e164 address option, the email-id option, or the h323-id
option above, the E.164 address can end in a trailing ‘., ‘s, or ‘*’.
redirect-reason Configure a redirect-reason to trigger on (range of 0 through 65535) with the
following reserved values:
0
1
2
4
9
10
15
Unknown reason.
Call forwarding busy or called DTE busy.
Call forwarded no reply.
Call deflection.
Called DTE out of order.
Call forwarding by the call DTE.
Call forwarding unconditionally.