Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
rule
VR-589
Cisco IOS Voice, Video, Fax Command Reference
Usage Guidelines When configuring your dial peers, you are provided with an option called the translation rule. This
option applies a translation rule to a calling party number (Automatic Number Identification [ANI]) or
a called party number (Dial Number Information Service [DNIS]) for both incoming and outgoing calls
within Cisco H.323 voice-enabled gateways. Also, the rule allows translation of the type of number.
Examples The following example applies a translation rule. If a called number starts with 5552205 or 52205, then
translation rule 21 will use the rule command to forward the number to 14085552205 instead.
translation-rule 21
rule 1 555.% 1408555 subscriber international
rule 2 7.% 1408555 abbreviated international
In the next example, if a called number is either 14085552205 or 014085552205, then after the execution
of the translation rule 345, the forwarding digits will be 52205. If the match type is configured and the
type is not “unknown,” then the dial peer matching will be required to match input string numbering type.
translation-rule 345
rule 1 .%555.% 7 any abbreviated
Related Commands
12.1(1)T This command was first supported on the T train for Voice over IP on the
following platforms: Cisco 1750 routers, Cisco 2600 and 3600 series
routers, Cisco AS5300 universal access servers, Cisco 7200 series
routers, and Cisco 7500 series routers.
12.1(2)T This command was first supported for Voice over IP on the
Cisco MC3810 multiservice concentrator.
Release Modification
Command Description
numbering-type Specifies number type for the VoIP or POTS dial peer.
test translation-rule Tests the execution of the translation rules on a specific name tag.
translate Applies a translation rule to a calling party number or a called party number
for incoming calls
translate-outgoing Applies a translation rule to a calling party number or a called party number
for outgoing calls
translation-rule Creates a translation name and enters translation-rule configuration mode.
voip-incoming
translation-rule
Captures calls that originate from H.323-compatible clients.