Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show mgcp
VR-743
Cisco IOS Voice, Video, Fax Command Reference
Table 46 describes the significant fields shown in the display.
Table 46 show mgcp Field Descriptions
MGCP Admin State...Oper
State
The administrative and operational state of the MGCP daemon. The
administrative state controls starting and stopping the application
using the mgcp and mgcp block-newcalls commands. The
operational state controls normal MGCP operations.
MGCP call-agent The address of the call agent specified in the mgcp command.
Initial protocol service is... Indicates the protocol initiated for this session.
MGCP block-newcalls
enabled
The state of the mgcp block-newcalls command.
MGCP dtmf-relay The setting for the mgcp dtmf-relay command.
MGCP modem passthru Indicates whether a call agent will be involved in relaying modem
data.
MGCP request timeout The setting for the mgcp request timeout command.
MGCP request retries The setting for the mgcp request retries command.
MGCP gateway port The UDP port specification.
MGCP maximum waiting
delay
The setting for the mgcp max-waiting-delay command.
MGCP restart delay The setting for the mgcp restart-delay command.
MGCP vad The setting for the mgcp vad command.
MGCP sdp simple Indicates whether the simple sdp protocol is being used.
MGCP cisco fgdos For Cisco use only.
MGCP codec type The setting for the mgcp codec command.
MGCP packetization period The packetization period parameter setting for the mgcp codec
command.
MGCP JB threshold lwm The jitter buffer minimum threshold parameter setting for the mgcp
quality-threshold command.
MGCP JB threshold hwm The jitter buffer maximum threshold parameter setting for the mgcp
quality-threshold command.
MGCP LAT threshold lwm The latency minimum threshold parameter setting for the mgcp
quality-threshold command.
MGCP LAT threshold hwm The latency maximum threshold parameter setting for the mgcp
quality-threshold command.
MGCP PL threshold lwm The packet loss minimum threshold parameter setting for the mgcp
quality-threshold command.
MGCP PL threshold hwm The packet loss maximum threshold parameter setting for the mgcp
quality-threshold command.
MGCP playout mode The jitter buffer packet size type and size.
MGCP IP ToS low delay The low-delay parameter setting for the mgcp ip-tos command.
MGCP IP ToS high
throughput
The high-throughput parameter setting for the mgcp ip-tos
command.