Cisco Systems VR-561 Doll User Manual


 
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
server trigger
VR-599
Cisco IOS Voice, Video, Fax Command Reference
The remote-ext-address argument is under the LCF trigger submode and has the following options:
The endpoint-type argument is under the RRQ and URQ trigger submodes and has the following options:
The supported-prefix keyword is under the RRQ and URQ submodes and has the following options:
Entering the no form of the server trigger command removes the trigger definition from the Cisco IOS
gatekeeper with all statically configured conditions under that trigger.
Examples The following example configures a server trigger on gatekeeper sj.xyz.com to notify external server
“Server-123” of any call to an E.164 number that starts with 1800 followed by any 7 digits (1800551212,
for example):
Gatekeeper
server trigger arq sj.xyz.com 1 Server-123 1.14.93.130 1751
destination-info e164 1800.......
exit
Related Commands
remote-ext-address Configure remote extension addresses, with the following options:
e164
word
Configure an E.164 pattern.
When configuring the e164 address option, the email-id option, or the
h323-id option above, the E.164 address can end in a trailing ‘., ‘s, or ‘*’.
endpoint-type Configure the type of endpoint to trigger, with the following options:
gatekeeper
h320-gateway
mcu
other-gateway
The endpoint is an H.323 gatekeeper.
The endpoint is an H.320 gateway.
The endpoint is a multipoint control unit (MCU).
The endpoint is another type of gateway not specified on this list.
proxy
terminal
voice-gateway
The endpoint is a H.323 proxy.
The endpoint is an H.323 proxy.
The endpoint is a voice gateway.
supported-prefix Configure the gateway technology prefix to trigger on.
word Enter a word within the set of “0123456789#*” when configuring the
E.164 pattern for a gateway technology prefix.
Command Description
server registration port Configure a gatekeeper listening port to listen for external server
connections.
show gatekeeper servers Show a list of currently registered and statically configured triggers on
this gatekeeper router.