Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show frame-relay vofr
VR-720
Cisco IOS Voice, Video, Fax Command Reference
The following is sample output from the show frame-relay vofr command when an interface is
specified:
Router# show frame-relay vofr serial0
interface vofr-type dlci cid cid-type
Serial0 VoFR 16 4 data
Serial0 VoFR 16 5 call-control
Serial0 VoFR 16 10 voice
The following is sample output from the show frame-relay vofr command when an interface and a
DLCI are specified:
Router# show frame-relay vofr serial0 16
VoFR Configuration for interface Serial0
dlci vofr-type cid cid-type input-pkts output-pkts dropped-pkts
16 VoFR 4 data 0 0 0
16 VoFR 5 call-control 85982 86099 0
16 VoFR 10 voice 2172293 6370815 0
The following is sample output from the show frame-relay vofr command when an interface, a DLCI,
and a CID are specified:
Router# show frame-relay vofr serial0 16 10
VoFR Configuration for interface Serial0 dlci 16
vofr-type VoFR cid 10 cid-type voice
input-pkts 2172293 output-pkts 6370815 dropped-pkts 0
Table 38 describes the significant fields shown in the display.
Related Commands
Table 38 show frame-relay vofr Field Descriptions
Field Description
interface Number of the interface that has been selected for observation of FRF.11
subchannels.
vofr-type Type of VoFR DLCI being observed.
cid The portion of the specified DLCI that is carrying the designated traffic
type. A DLCI can be subdivided into 255 subchannels.
cid-type Type of traffic carried on this subchannel.
input-pkts Number of packets received by this subchannel.
output-pkts Number of packets sent on this subchannel.
dropped-pkts Total number of packets discarded by this subchannel.
Command Description
show call active voice Displays the contents of the active call table.
show call history voice Displays the contents of the call history table.
show dial-peer voice Displays configuration information and call statistics for dial peers.
show frame-relay
fragment
Displays Frame Relay fragmentation details.