Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
shutdown (settlement)
VR-868
Cisco IOS Voice, Video, Fax Command Reference
shutdown (settlement)
To deactivate the settlement provider, use the shutdown command in settlement configuration mode. To
activate a settlement provider, use the no shutdown command
shutdown
no shutdown
Syntax Description This command has no arguments or keywords.
Defaults The default status of a settlement provider is deactivated. The settlement provider is down.
Command Modes Settlement configuration
Command History
Usage Guidelines Use the no shutdown command at the end of the configuration of a settlement server to bring up the
provider. This command activates the provider. Otherwise, transactions will not go through the provider
to be audited and charged. Use the shutdown command to deactivate the provider.
Examples The following example enables a settlement server:
settlement 0
no shutdown
The following example disables a settlement server:
settlement 0
shutdown
Related Commands
Release Modification
12.0(4)XH1 This command was introduced the Cisco 2500 series and Cisco 3600
series routers and on the Cisco AS5300 universal access server.
12.1(1)T This command was integrated into Cisco IOS Release 12.1(1)T.
Command Description
connection-timeout Configures the time that a connection is maintained after completing a
communication exchange.
customer-id Identifies a carrier or ISP with a settlement provider.
device-id Specifies a gateway associated with a settlement provider.
encryption Sets the encryption method to be negotiated with the provider.
max-connection Sets the maximum number of simultaneous connections to be used for
communication with a settlement provider.