Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show ss7 mtp2 state
VR-797
Cisco IOS Voice, Video, Fax Command Reference
show ss7 mtp2 state
To display internal SS7 Message Transfer Part level 2 (MTP 2) state machine information, use the show
ss7 mtp2 state command in privileged EXEC mode.
show ss7 mtp2 state [channel]
Syntax Description
Defaults If you do not specify a channel, the command shows state machine information for channel 0.
Command Modes Privileged EXEC
Command History
Examples The following examples show the display of MTP 2 state machine information for two different
channels. Table 56 explains the fields.
Router# show ss7 mtp2 state 0
SS7 MTP2 states for channel 0
Protocol version for channel 0 is Japan NTT Q.703 Version 1-1
MTP2LSC_OOS MTP2IAC_IDLE
MTP2TXC_INSERVICE MTP2RC_IDLE
MTP2SUERM_IDLE MTP2AERM_IDLE
MTP2CONGESTION_IDLE
Congestion Backhaul = Abate
Remote Processor Outage = FALSE
Router# show ss7 mtp2 state 1
SS7 MTP2 states for channel 1
Protocol version for channel 1 is Japan NTT Q.703 Version 1-1
MTP2LSC_OOS MTP2IAC_IDLE
MTP2TXC_INSERVICE MTP2RC_IDLE
MTP2SUERM_IDLE MTP2AERM_IDLE
MTP2CONGESTION_IDLE
Congestion Backhaul = Abate
Remote Processor Outage = FALSE
channel Specifies a channel from 0 to 3.
Release Modification
12.0(7)XR This command was introduced.
12.1(1)T This command was integrated into Cisco IOS
Release 12.1(1)T.