Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show voice port
VR-844
Cisco IOS Voice, Video, Fax Command Reference
Table 65 describes the significant fields shown in the display.
Table 65 show voice port Field Descriptions for the Cisco AS5800
Field Description
Type of VoicePort Indicates the voice port type.
Operational State Operational state of the voice port.
Administrative State Administrative state of the voice port.
Clear Wait Duration Timing Time of inactive seizure signal to declare call cleared.
Currently Processing Type of call currently being processed: none, voice, or fax.
Operations State Operation state of the port.
Operation Type Operation of the E&M signal: two-wire or four-wire.
Noise Regeneration Whether or not background noise should be played to fill silent
gaps if VAD is activated.
Non-Linear Processing Whether or not nonlinear processing is enabled for this port.
Music-On-Hold Threshold Configured music-on-hold threshold value for this interface.
In Gain Amount of gain inserted at the receiver side of the interface.
Out Attenuation Amount of attenuation inserted at the transmit side of the
interface.
Pulse Rate Timing Pulse dialing rate, in pulses per second (pps).
Echo Cancellation Whether or not echo cancellation is enabled for this port.
Echo Cancel Coverage Echo cancel coverage for this port.
Connection Mode Connection mode of the interface.
Connection Number Full E.164 telephone number used to establish a connection
with the trunk or PLAR mode.
Initial Time Out Amount of time the system waits for an initial input digit from
the caller.
Interdigit Time Out Amount of time the system waits for a subsequent input digit
from the caller.
Regional Tone Configured regional tone for this interface.