Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show dialplan incall number
VR-714
Cisco IOS Voice, Video, Fax Command Reference
forward-digits 4
session-target = `', voice-port = `1/0/1:D',
direct-inward-dial = enabled,
digit_strip = enabled,
register E.164 number with GK = TRUE
Connect Time = 0, Charged Units = 0,
Successful Calls = 0, Failed Calls = 0,
Accepted Calls = 0, Refused Calls = 0,
Last Disconnect Cause is "",
Last Disconnect Text is "",
Last Setup Time = 0.
Matched: Digits: 0
Target:
Table 36 describes the significant fields shown in the display.
Table 36 show dialplan number Field Descriptions
Field Description
Macro Exp. Expected destination pattern for this dial peer.
VoiceEncapPeer Dial peer associated with the calling number entered.
tag Unique number identifying the dial peer.
destination-pattern Destination pattern (telephone number) configured for this dial
peer.
answer-address Answer address (calling number) configured for this dial peer.
preference Hunt group preference order set for this dial peer.
Admin state Describes the administrative state of this dial peer.
Operation state Describes the operational state of this dial peer.
incoming called-number Called number (DNIS) configured for this dial peer.
DTMF Relay Whether the dtmf-relay command is enabled or disabled for this
dial peer.
huntstop Whether the huntstop command is enabled or disabled for this dial
peer.
in bound application associated The IVR application that is associated with this dial peer when this
dial peer is used for an inbound call leg.
out bound application
associated
The IVR application that is associated with this dial peer when this
dial peer is used for an outbound call leg.
type Type of dial peer (POTS or VoIP).
prefix The prefix number that is added to the front of the dial string before
it is forwarded to the telephony device.
forward-digits Which digits are forwarded to the telephony interface as configured
using the forward-digits command.
session-target Displays the configured session target (IP address or host name) for
this dial peer.
voice-port The voice port through which calls come into this dial peer.
direct-inward-dial Whether the direct-inward-dial command is enabled or disabled
for this dial peer.