Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show dialplan incall number
VR-715
Cisco IOS Voice, Video, Fax Command Reference
Related Commands
digit_strip Whether digit stripping is enabled or disabled in the dial peer.
Enabled is the default.
session-protocol Session protocol to be used for Internet calls between local and
remote router via the IP backbone.
Connect Time Unit of measure indicating the call connection time associated with
this dial peer.
Charged Units Number of call units charged to this dial peer.
Successful Calls Number of completed calls to this peer since system startup.
Failed Calls Number of uncompleted (failed) calls to this peer since system
startup.
Accepted Calls Number of calls from this peer accepted since system startup.
Refused Calls Number of calls from this peer refused since system startup.
Last Disconnect Cause Encoded network cause associated with the last call. This value will
be updated whenever a call is started or cleared and depends on the
interface type and session protocol being used on this interface.
Last Disconnect Text ASCII text describing the reason for the last call termination.
Last Setup Time Value of the System Up Time when the last call to this peer was
started.
Matched Destination pattern matched for this dial peer.
Target Matched session target (IP address or host name) for this dial peer.
Table 36 show dialplan number Field Descriptions (continued)
Field Description
Command Description
show dial peer voice Displays the configuration information for dial peers.
show dialplan number Displays which dial peer is matched for a particular telephone
number.