Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
shutdown (RLM)
VR-867
Cisco IOS Voice, Video, Fax Command Reference
shutdown (RLM)
To shut down all of the links under the RLM group, use the shutdown command in RLM configuration
mode. RLM will not try to reestablish those links until the command is negated. To disable this function,
use the no form of this command.
shutdown
no shutdown
Syntax Description This command has no arguments or keywords.
Defaults Disabled
Command Modes RLM configuration
Command History
Related Commands
Release Modification
11.3(7) This command was introduced.
Command Description
clear rlm group Clears all RLM group time stamps to zero.
clear interface Resets the hardware logic on an interface.
interface Defines the IP addresses of the server, configures an interface type, and
enters interface configuration mode.
link (RLM) Specifies the link preference.
protocol rlm port Reconfigures the port number for the basic RLM connection for the whole
rlm-group.
retry keepalive Allows consecutive keepalive failures a certain amount of time before the
link is declared down.
server (RLM) Defines the IP addresses of the server.
show rlm group
statistics
Displays the network latency of the RLM group.
show rlm group status Displays the status of the RLM group.
show rlm group timer Displays the current RLM group timer values.
timer Overwrites the default setting of timeout values.