Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show settlement
VR-785
Cisco IOS Voice, Video, Fax Command Reference
show settlement
To display the configuration for all settlement servers and see the specific provider and transactions, use
the show settlement command in privileged EXEC mode. To reset to the default value, use the no form
of this command.
show settlement [provider-number [transactions]]
no show settlement [provider-number [transactions]]
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Examples The following example shows information about all settlement servers configured:
Router# show settlement
Settlement Provider 0
Type = osp
Address url = https://1.14.115.100:6556/
Encryption = all (default)
Max Concurrent Connections = 20 (default)
Connection Timeout = 3600 (s) (default)
Response Timeout = 1 (s) (default)
Retry Delay = 2 (s) (default)
Retry Limit = 1 (default)
Session Timeout = 86400 (s) (default)
Customer Id = 1000
Device Id = 1000
Roaming = Disabled (default)
Signed Token = on
Number of Connections = 0
Number of Transactions = 7
provider-number (Optional) Displays the attributes of a specific provider.
transactions (Optional) Displays the transaction status of a specific provider.
Release Modification
12.0(4)XH1 This command was introduced on the Cisco 2600 series and Cisco 3600
series routers and on the Cisco AS5300 universal access server.
12.1(1)T This command was integrated into Cisco IOS Release 12.1(1)T.