Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show gatekeeper status
VR-731
Cisco IOS Voice, Video, Fax Command Reference
show gatekeeper status
To show overall gatekeeper status, including authorization and authentication status, zone status, and so
on, use the show gatekeeper status command in EXEC mode.
show gatekeeper status
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Command History
Examples The following is sample output from the show gatekeeper status command:
Router# show gatekeeper status
Gatekeeper State: UP
Zone Name: gk-px4.cisco.com
Accounting: DISABLED
Security: DISABLED
Table 42 describes the significant fields shown in the display.
Release Modification
11.3(2)NA This command was introduced.
12.0(3)T The command introduced in Cisco IOS Release 11.3(2)NA was integrated
into Cisco IOS Release 12.0(3)T.
Tabl e 4 2 show ga te keeper status Field Descriptions
Field Description
Gatekeeper State Gatekeeper status has the following values:
• UP is operational.
• DOWN is administratively shut down.
• INACTIVE is administratively enabled, that is, the no shutdown
command has been issued, but no local zones have been configured.
• HSRP STANDBY indicates that the gatekeeper is on hot standby and
will take over when the currently active gatekeeper fails.
Zone Name Zone name.
Accounting Authorization and accounting status.
Security Security status.