Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show translation-rule
VR-813
Cisco IOS Voice, Video, Fax Command Reference
Examples The following example shows output for the show translation-rule command:
Router# show translation-rule
Translation rule address:0x61AB94F8
Tag name:21
Translation rule in_used 1
**** Xrule rule table *******
Rule :1
in_used state:1
Match pattern:555.%
Sub pattern:1408555
Match type:subscriber
Sub type:international
**** Xrule rule table *******
Rule :2
in_used state:1
Match pattern:8.%
Sub pattern:1408555
Match type:abbreviated
Sub type:international
Translation rule address:0x61C2E6D4
Tag name:345
Translation rule in_used 1
**** Xrule rule table *******
Rule :1
in_used state:1
Match pattern:.%555.%
Sub pattern:7
Match type:ANY
Sub type:abbreviated
Table 59 describes the significant fields shown in the display.
Table 59 show translation-rule Field Descriptions
Related Commands
Translation rule address The translation rule address in hex.
Tag name The translation rule tag name.
Translation rule in_used The translation rule in which the tag is used.
**** Xrule rule table ******* Specifies the beginning of the display for a specific rule.
Rule:x The number of the rule.
in_used state: The input-searched-pattern.
Match pattern: The match pattern of the rule.
Sub pattern: The substituted pattern.
Match type: The match type.
Sub type: The substituted pattern match type.
Command Description
numbering-type Specifies number type for the VoIP or POTS dial peer.
rule Applies a translation rule to a calling party number or a called party
number for both incoming and outgoing calls.
test translation-rule Tests the execution of the translation rules on a specific name-tag.