Cisco Systems VR-561 Doll User Manual


 
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show voice port
VR-835
Cisco IOS Voice, Video, Fax Command Reference
For the Cisco 2600 and 3600 Series Router with Analog Voice Ports:
For the Cisco 2600 and 3600 Series Router with Digital Voice Ports:
For the Cisco MC3810 Multiservice Concentrator with Analog Voice Ports:
slot/subunit/port (Optional) Displays information for the analog voice port you
specify with the slot/subunit/port designation.
slot specifies a router slot in which a voice network module
(VNM) is installed. Valid entries are router slot numbers
for the particular platform.
subunit specifies a voice interface card (VIC) where the
voice port is located. Valid entries are 0 and 1. (The VIC
fits into the voice network module.)
port specifies an analog voice port number. Valid entries
are 0 and 1.
summary (Optional) Displays a summary of all voice ports.
slot/port:ds0-group (Optional) Displays information for the digital voice port you
specify with the slot/port:ds0-group designation.
slot specifies a router slot in which the packet voice trunk
network module (NM) is installed. Valid entries are router
slot numbers for the particular platform.
port specifies a T1 or E1 physical port in the voice WAN
interface card (VWIC). Valid entries are 0 and 1. (One
VWIC fits in an NM.)
ds0-group specifies a T1 or E1 logical port number. Valid
entries are from 0 to 23 for T1 and from 0 to 30 for E1.
summary (Optional) Displays a summary of all voice ports.
slot/port (Optional) Displays information for the analog voice port you
specify with the slot/port designation.
slot is the physical slot in which the analog voice module
(AVM) is installed. The slot is always 1 for analog voice
ports in the Cisco MC3810 multiservice concentrator.
port specifies an analog voice port number. Valid entries
are from 1 to 6.
summary (Optional) Displays a summary of all voice ports.