Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
set
VR-617
Cisco IOS Voice, Video, Fax Command Reference
set
To create a fault-tolerant or non-fault-tolerant session-set with the client or server option, use the set
command in backhaul session manager configuration mode. To delete the set, use the no form of this
command.
set set-name { client | server } { ft | nft }
no set set-name { client | server } { ft | nft }
Syntax Description
Defaults No default behavior or values.
Command Modes Backhaul session manager configuration
Command History
Usage Guidelines There can be multiple groups associated with a session-set.
The session-set should only be configured for the client for backhaul (not the server).
A set cannot be deleted unless the groups associated with the set are deleted first.
Examples To specify the client set named Set1 to fault-tolerant, see the following example:
Router(config-bsm)# set set1 client ft
set-name Session-set name.
client Client option. The session-set should only be configured as
client for backhaul.
server Server option.
ft Fault-tolerant. Fault-tolerance is the level of ability within a
system to operate properly even if a group in the set fails.
nft Non-fault-tolerant. Only one group is allowed in a
non-fault-tolerant set.
Release Modification
12.1(1)T This command was introduced.