Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show pots csm
VR-753
Cisco IOS Voice, Video, Fax Command Reference
show pots csm
To show the current state of calls and the most recent event received by the call switching module (CSM)
on the Cisco 800 series router, use the show pots csm command in EXEC mode.
show pots csm port
Syntax Description
Command Modes EXEC
Command History
Examples The following is an example of show pots csm command output:
Router# show pots csm 1
POTS PORT: 1
CSM Finite State Machine:
Call 0 - State: idle, Call Id: 0x0
Active: no
Event: CSM_EVENT_NONE Cause: 0
Call 1 - State: idle, Call Id: 0x0
Active: no
Event: CSM_EVENT_NONE Cause: 0
Call 2 - State: idle, Call Id: 0x0
Active: no
Event: CSM_EVENT_NONE Cause: 0
Related Commands
port Port number 1 or 2.
Release Modification
12.1.(2)XF This command was introduced on the Cisco 800 series routers.
Command Description
test pots dial Dial a telephone number for the POTS port on the router by using a dial
application on your workstation.
test pots disconnect Disconnect a telephone call for the POTS port on the router.