Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show vrm vdevices
VR-860
Cisco IOS Voice, Video, Fax Command Reference
core type used Type of DSPware in use. Possible field values are:
• 1 = UBL (boot loader)
• 2 = high complexity core
• 3 = medium complexity core
• 4 = low complexity core
• 255 = invalid
number of modules Number of modules on the VFC. Maximum is 16.
number of voice devices
(DSP)s
Number of possible DSPs. Maximum number is 96.
chans per vdevice Number of channels (meaning calls) each DSP can handle.
tot chans Total number of channels.
tot active calls Total number of active calls on this VFC.
module presense bit map Indicates a 16-bit bitmap, each bit representing a module.
tdm mode Time division multiplex bus mode. Possible field values are:
• 0 = VFC is in classic mode.
• 1 = VFC is in plus mode.
This field should always be 1.
num_of_tdm_time slots Total number of calls that can be handled by the VFC.
auto recovery Indicates whether auto recovery is enabled. When autorecovery is
enabled, the VRM will try to recover a DSP by resetting it if, for some
reason, the DSP stops responding.
number of default voice file
(core type images)
Number of DSPware files in use.
maj ver Major version of the DSPware in use.
min ver Minor version of the DSPware in use.
core type Type of DSPware in use: Possible field values are:
• 1 = boot loader
• 2 = high complexity core
• 3 = medium complexity core
• 4 = low complexity core
trough size This value indirectly represents the complexity of the DSPware in use.
slop value This value indirectly represents the complexity of the DSPware in use.
Table 70 show vrm vdevices summary Field Descriptions (continued)
Field Description