Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show rudpv1
VR-781
Cisco IOS Voice, Video, Fax Command Reference
show rudpv1
To display Reliable User Datagram Protocol (RUDP) information, use the show rudpv1 command in
privileged EXEC mode.
show rudpv1 { failures | parameters | statistics }
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines Because the statistics counters are continually updated, the cumulative total may not be exactly equal to
individual connection counters. After a connection is reset, previous statistics are lost, so the current
connection statistics reflect only this instance of the RUDP connection—since the last reset.
Cumulative statistics reflect counts since the router was rebooted or since the last time the clear rudpv1
statistics command was issued.
Examples The following example shows sample output for show rudpv1 failures:
Router# show rudpv1 failures
**** RUDPV1 Failure Stats ****
CreateBufHdrsFailure 0
CreateConnRecsFailure 0
CreateEventQueueFailure 0
OsSpecificInitFailure 0
NotReadyFailures 0
OptionNotSupportedFailures 0
InvalidOptionFailures 0
OptionRequiredFailures 0
GetConnRecFailures 0
InvalidConnFailures 0
EventUnavailFailures 0
GetConnRecFailures 0
FindConnRecFailures 0
EmptyBufferSendFailures 0
failures RUDP failure statistics.
parameters RUDP connection parameters.
statistics RUDP internal statistics.
Release Modification
12.1(1)T This command was introduced.