Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show ss7 mtp2 stats
VR-800
Cisco IOS Voice, Video, Fax Command Reference
show ss7 mtp2 stats
To display SS7 MTP 2 operational statistics, use the show ss7 mtp2 stats command in privileged EXEC
mode.
show ss7 mtp2 stats [channel]
Syntax Description
Defaults If you do not specify a channel, the command shows status information for channel 0.
Command Modes Privileged EXEC
Command History
Examples The following example shows operations and maintenance (OM) statistics for MTP 2 channel 0.
Table 57 explains some of the fields.
Router# show ss7 mtp2 stats 0
SS7 MTP2 Statistics for channel 0
Protocol version for channel 0 is Japan NTT Q.703 Version 1-1
OMIACAlignAttemptCount = 0
OMIACAlignFailCount = 0
OMIACAlignCompleteCount = 0
OMMSU_TO_XMIT_Count = 0
OMMSU_XMIT_Count = 0
OMMSU_RE_XMIT_Count = 0
OMMSU_RCV_Count = 0
OMMSU_Posted_Count = 0
OMMSU_too_long = 0
OMFISU_XMIT_Count = 0
OMFISU_RCV_Count = 0
OMLSSU_XMIT_Count = 17
OMLSSU_XMIT_SINCount = 0
OMLSSU_XMIT_SIECount = 0
OMLSSU_XMIT_SIOCount = 0
OMLSSU_XMIT_SIOSCount = 17
OMLSSU_XMIT_SIPOCount = 0
OMLSSU_XMIT_SIBCount = 0
channel Specifies a channel from 0 through 3.
Release Modification
12.0(7)XR This command was introduced.
12.1(1)T This command was integrated into Cisco IOS
Release 12.1(1)T.