Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
roaming (dial-peer)
VR-584
Cisco IOS Voice, Video, Fax Command Reference
roaming (dial-peer)
To enable the roaming capability for the dial peer, use the roaming command in dial-peer configuration
mode. To disable the roaming capability, use the no form of this command.
roaming
no roaming
Syntax Description This command has no arguments or keywords.
Defaults No roaming
Command Modes Dial-peer configuration
Command History
Usage Guidelines Enable the roaming capability of a dial peer if that dial peer can terminate roaming calls. If a dial peer
is dedicated to local calls only, disable the roaming capability.
The roaming dial peer must work with a roaming service provider. If the dial peer allows a roaming user
to go through, and the service provider is not roaming-enabled, the call fails.
Examples The following example enables the roaming capability for the dial peer:
dial-peer voice 10 voip
roaming
Related Commands
Release Modification
12.1(1)T This command was introduced on the Cisco 2600 series and Cisco 3600
series routers and on the Cisco AS5300 universal access server‘.
Command Description
roaming (settlement) Enables the roaming capability for a settlement provider.
settle-call Limits the dial peer to using only the specific clearinghouse identified
by the specified provider-number.
settlement roam-pattern Configures a pattern to match against when determining roaming.