Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show mgcp statistics
VR-748
Cisco IOS Voice, Video, Fax Command Reference
show mgcp statistics
To display Media Gateway Control Protocol (MGCP) configuration information, use the show mgcp
statistics command in EXEC mode.
show mgcp statistics
Syntax Description
Defaults No defaults
Command Modes EXEC
Command History
Examples Following is an example of an MGCP configuration displaying MGCP statistics of network messages
that have been received and sent.
Router# show mgcp statistics
UDP pkts rx 8, tx 9
Unrecognized rx pkts 0, MGCP message parsing errors 0
Duplicate MGCP ack tx 0, Invalid versions count 0
CreateConn rx 4, successful 0, failed 0
DeleteConn rx 2, successful 2, failed 0
ModifyConn rx 4, successful 4, failed 0
DeleteConn tx 0, successful 0, failed 0
NotifyRequest rx 0, successful 4, failed 0
AuditConnection rx 0, successful 0, failed 0
AuditEndpoint rx 0, successful 0, failed 0
RestartInProgress tx 1, successful 1, failed 0
Notify tx 0, successful 0, failed 0
ACK tx 8, NACK tx 0
ACK rx 0, NACK rx 0
IP address based Call Agents statistics:
IP address 10.24.167.3, Total msg rx 8, successful 8, failed 0
statistics Displays MGCP statistics regarding network messages that have
been received and sent.
Release Modification
12.1(1)T This command was introduced for the Cisco AS5300 universal
access server.
12.1(3)T Output was updated to show additional gateway and platform
information.