Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show call application voice
VR-662
Cisco IOS Voice, Video, Fax Command Reference
show call application voice
To define the names of the audio files that the interactive voice response (IVR) script will play, the
operation of the abort keys, the prompts that are used, and caller interaction, use the show call
application voice command in EXEC mode.
show call application voice [name | summary]
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command History
Usage Guidelines If the name of a specific application is entered, it will give information about that application.
If the summary keyword is entered, a one-line summary will be displayed about each application.
If the command is entered without the summary, a detailed description of the entered IVR application
is displayed.
Examples This example shows the output for the clid_authen_collect IVR script:
Router# show call application voice clid_authen_collect
Application clid_authen_collect has 10 states with 0 calls active
State start has 1 actions and 5 events
Do Action IVR_ACT_AUTHENTICATE. accountName=ani, pinName=dnis
If Event IVR_EV_DEFAULT goto state end
If Event IVR_EV_CALL_DIGIT do nothing
If Event IVR_EV_CALL_SETUP_IND do action IVR_ACT_CALL_SETUP_ACK
and goto state start
If Event IVR_EV_AAA_SUCCESS goto state collect_dest
If Event IVR_EV_AAA_FAIL goto state get_account
State end has 1 actions and 3 events
Do Action IVR_ACT_END.
If Event IVR_EV_DEFAULT goto state end
If Event IVR_EV_CALL_DIGIT do nothing
If Event IVR_EV_CALL_DISCONNECT_DONE do action IVR_ACT_CALL_DESTROY
name (Optional) The name of the desired IVR application.
summary (Optional) Displays a one-line summary. If the command is entered
without the summary keyword, a complete detailed description is
displayed of the application.
Release Modification
11.3(6)NA2 This command was introduced on the Cisco 2500 series and
Cisco 3600 series routers and the Cisco AS5300 universal access
server.