Cisco Systems VR-561 Doll User Manual


 
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
server registration-port
VR-596
Cisco IOS Voice, Video, Fax Command Reference
server registration-port
To configure the listener port for the server to establish a connection with the gatekeeper, use the server
registration-port command in gatekeeper configuration mode. To force the gatekeeper to close the
listening socket so that no more new registration takes place, use the no form of this command.
server registration-port port number
no server registration-port port number
Syntax Description
Defaults The registration port of the gatekeeper is not configured, so no external server can register with this
gatekeeper.
Command Modes Gatekeeper configuration
Command History
Usage Guidelines Use this command to configure a server registration port to poll for servers that want to establish
connections with the gatekeeper on this router.
Note The no form of this command forces the gatekeeper on this router to close the listen socket, so it
cannot accept more registrations. However, existing connections between the gatekeeper and servers
are left open.
Examples The following example shows how a listener port for a server is established for connection with a
gatekeeper:
server registration-port 20000
Related Commands
port number Specifies a single range of values from 1 through 65535 for the port
number on which the gatekeeper listens for external server connections.
Release Modification
12.1(1)T This command was introduced on the Cisco 2500 series, Cisco 2600
series, Cisco 3600 series, and Cisco 7200 series routers and on the
Cisco MC3810 multiservice concentrator.
Command Description
server trigger Configure static server triggers for specific RAS messages to be forwarded
to a specified server.