Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show translation-rule
VR-812
Cisco IOS Voice, Video, Fax Command Reference
show translation-rule
To display the contents of the rules that have been configured for a specific translation name, use the
show translation-rule command in privileged EXEC mode.
show translation-rule [name-tag]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines This command gives detailed information about the configured rules under this rule name. If the name
tag is not entered, a complete display of all the configured rules will be shown.
name-tag (Optional) The tag number by which the rule set will be
referenced. This is an arbitrarily chosen number. The range is
from 1 through 2,147,483,647.
Release Modification
12.0(7)XR1 This command was introduced for Voice over IP on the Cisco
AS5300 universal access server.
12.0(7)XK This command was first supported for the following voice
technologies on the following platforms:
• Voice over IP (Cisco 2600 series, Cisco 3600 series,
Cisco MC3810 multiservice concentrator)
• Voice over Frame Relay (Cisco 2600 series, Cisco 3600
series, Cisco MC3810 multiservice concentrator)
• Voice over ATM (Cisco 3600 series, Cisco MC3810
multiservice concentrator)
12.1(1)T This command was first supported on the T train for the
following voice technology on the following platforms:
• Voice over IP (1750, Cisco 2600 series, Cisco 3600 series,
Cisco AS5300 universal access server, Cisco 7200 series,
and Cisco 7500 series)
12.1(2)T This command was first supported on the T train for the
following voice technologies on the following platforms:
• Voice over IP (Cisco MC3810 multiservice concentrator)
• Voice over Frame Relay (Cisco 2600 series, Cisco 3600
series, Cisco MC3810 multiservice concentrator)
• Voice over ATM (Cisco 3600 series, Cisco MC3810
multiservice concentrator)