Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show connect
VR-691
Cisco IOS Voice, Video, Fax Command Reference
show connect
To display configuration information about drop-and-insert connections that have been configured on a
router, enter the show connect command in privileged EXEC mode.
show connect {all | elements | name | id | port {T1 | E1} slot/port}}
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command shows drop-and-insert connections on the Cisco 2600 and 3600 series.
The command displays different information in different formats, depending on the keyword that you
use.
all Displays a table of all configured connections.
elements Displays registered hardware or software interworking elements.
name Displays a connection that has been named by using the connect global
configuration command. The name you enter is case sensitive and must
match the configured name exactly.
id Displays the status of a connection that you specify by an identification
number or range of identification numbers. The router assigns these IDs
automatically in the order in which they were created, beginning with 1.
The show connect all command displays these IDs.
port Displays the status of a connection that you specify by indicating the
type of controller (T1 or E1) and location of the interface.
T1 Specifies a T1 controller.
E1 Specifies an E1 controller.
slot/port The location of the T1 or E1 controller port whose connection status you
want to see. Valid values for slot and port are 0 and 1. The slash must be
entered.
Release Modification
12.0(5)XK This command was introduced on the Cisco 2600 series and Cisco 3600
series routers.
12.0(7)T The command introduced in Cisco IOS Release 12.0(5)XK was
integrated into Cisco IOS Release 12.0(7)T.