Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show gateway
VR-735
Cisco IOS Voice, Video, Fax Command Reference
show gateway
To display the current gateway status, use the show gateway command in privileged EXEC mode.
show gateway
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command displays the current gateway status.
Examples The following example shows the report that appears when the gateway is not registered with a
gatekeeper:
Router# show gateway
Gateway gateway1 is not registered to any gatekeeper
Gateway alias list
H323-ID gateway1
H323 resource thresholding is Enabled but NOT Active
H323 resource threshold values:
DSP: Low threshold 60, High threshold 70
DS0: Low threshold 60, High threshold 70
This following example indicates that an E.164 address has been assigned to the gateway:
Router# show gate
Gateway gateway1 is registered to Gatekeeper gk1
Gateway alias list
E.164 Number 5551212
H323-ID gateway1
The following example shows the report that appears when the gateway is registered with a gatekeeper
and H.323 resource threshold reporting is enabled with the resource threshold command:
Router# show gateway
Gateway gateway1 is registered to Gatekeeper gk1
Gateway alias list
Release Modification
11.3(6)NA2 This command was introduced on the Cisco 2600 series and
Cisco 3600 series routers.
12.0(5)T This display format was modified for H.323 V2.