Filter
Top Products
98 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
RL
Define Reference Line
The reference line can be defined by entering a distance
value, a line offset value and an angle value for the base
line. Heights can be changed by a constant rate (eg, 1m)
by entering a H offset value.
REFLN\ DEFINE REF LINE
14:03
NEWL MEAS
F1
F2 F3
F4
F5 F6
HELP
MC
1.BasePoint : 12
2.BasePoint : 13
Offset : 1.000 m
Line : 1.558 m
Alpha : 2°03'39"
H Offset : 0.500 m
1.BasePoint : The first base point that defines the
base line.
2.BasePoint : The second base point that defines the
base line.
Offset : Establishes the displacement parallel
to the base line.
Line : Establishes the distance from the first
reference point to the starting point of
the new reference line.
Alpha : Establishes the angle between the base
line and the new reference line.
H Offset : Displaces the base line parallel in
height.
Define a new base line.
Accept parameters as displayed and proceed to the
"RESULT REF LINE" dialog.
or