Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 71
IV
EL
AH
OH
BS
SM
SO
Hz Angle 1 : Angle from the first auxiliary point to
the stakeout point.
Dist 1 : Distance from the first auxiliary point
to the stakeout point.
Hz Angle 2 : Angle from the second auxiliary point
to the stakeout point.
Dist 2 : Distance from the second auxiliary
point to the stakeout point.
∆∆
∆∆
∆ Height : Difference in height between the last
measured reflector point and the
stakeout point. Positive in sign if
stakeout point is higher than the
reflector position.
Simultaneously measure and record data on the active
recording device.
Measure a distance.
Record the measurement on the active recording device.
Enter target data as described in chapter "Measure &
Record" of "System" - user manual.
Re-position the telescope on the target. Note, this
function is only available for motorized theodolites.
Change stakeout method. For more information refer to
chapter "Select Stakeout Method".
Generate a plot of the stakeout data. For more
information refer to chapter "Plot".
Exit the program.
Acquire the next point to stake.