Filter
Top Products
12 TPS-System 1000 Programs-2.3.1en © Leica
IN
project.
All installation programs and applications are supplied
on normal 3 1/2" diskettes.
For optimal use of the programs and instruments read
this manual carefully.
The hardware and software used to transfer the
individual program packages must meet the following
requirements:
• IBM-compatible PC, 386 or higher
• 4 MB RAM
• 3.5" floppy-disk drive
• RS 232 interface, including interface cable for Leica
survey instruments (stock no. 563625)
• MS DOS 5.0 or higher
• MS Windows 3.1
Four diskettes are supplied with each instrument:
• disk 1 = SYSTEM FIRMWARE
• disk 2 = Programs and Languages
• disk 3 = TPS-WORKBENCH
• disk 4 = RCS 1000
More information can be found in the file
README.TXT on each diskette.
Recommended installation procedure:
1. TPS-WORKBENCH (disk 3)
2. SYSTEM FIRMWARE (disk 1)
3. Programs and languages (disk 2)
4. RCS 1000 (disk 4)
Hardware and software
required
Installation in the PC