Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 79
IV
EL
AH
OH
BS
SM
AS
FS
Free Station
Introduction
This manual describes the "FREE STATION" program
of the TPS SYSTEM 1000 theodolite series.
E
H
E0
PROG_Z19
N
Pt1
Pt2
Pt3
N0
This program can be used to deduce the three-dimensio-
nal coordinates for the instrument station and the
horizontal orientation of the from measurements to a
maximum of 10 target points.
For simultaneous determination of the station elevation,
height of instrument and height of reflector must
already have been input and the elevation of the target
points must be known.
The program allows measurement in single or dual-face
mode.
Directions to target points can be determined, as can
any combination of direction and distance. To compute
the position coordinates, at least three elements (2
directions and 1 distance) are necessary.