Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 289
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Reference Point
Displays additional information about how the location
of the prism pole relates to components of the cross-
section. Do this after a measurement has been made.
ROAD+\ REFERENCE POINT
14:03
MC
1L
Chainage : 0.000
Template : typcut
∆Chainage : 3.254 m
∆Catch Offs : -0.347 m
∆Catch HgtD : -0.389 m
ALL DIST REC TARGT
∆Hinge Offs : 8.154 m
∆Hinge HgtD : -2.123 m
∆CL Offset : 9.213 m
∆CL HgtDiff : -1.124 m
F1
F2 F3
F4
F5 F6
HELP STORE I<>II
1L : Indicates the location of the cross
section point in relation to the
centerline. In this example, the "1L"
means the first point of the template
left of centerline.
Chainage : Displays the current chainage.
Template : Displays the template name being
used.
∆∆
∆∆
∆Chainage : Displays where the rod is in relation to
the actual chainage. Move the rod to
the right as you are looking from the
pole towards the instrument if the
value is positive. If the value is
negative move to the left.