Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 199
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
RO
The Data block
11....+0STATION 71....+GEOM_ELE 72....+RAD/PARA 83..10+00HEIGHT
WI 11 STATION: Chainage (from the Hz-
alignment) at the start of the element. 8-digit
number.
WI 71 GEOM_ELE: Geometrical element
according to table page 195 (STRAIGHT,
000CURVE, PARABOLA, 00000EOP).
WI 72 RAD/PARA: Arc radius or parabola
parameter. 8-digit number.
If WI 71 = STRAIGHT / 00000EOP, then WI
72 = 00000NON.
Sign: "+" = dip, "-" = crest
WI 83 HEIGHT: Height H of the main point
(starting point, start of curve, end point, in
accordance with table page 195). 8-digit
number.
Also:
• The header is always at the beginning of a data file.
• The V-alignment file must be composed of at least
two parts (starting- and finishing point).
• The units and decimal places used in the WIs 11 and
72 are in accordance with the definition in WI 83.
• The chainage is given by the sum of the horizontal
element lengths.
• Geometrical elements can be combined freely.
• There is no limitation on the size of the V-alignment
file. As a result, as many data blocks as required can
be entered if a file is created on the PC using the
DOS program "ROADDATA.EXE". If a file is
created/edited using the program "FILE EDITOR"
on the TPS1000 there is a limitation of 200 data
blocks.
Check your data for errors (typing errors, signs etc.)
before you load it into the memory card.