Leica 1000Z01 Model Vehicle User Manual


 
© Leica TPS-System 1000 Programs-2.3.1en 155
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
TR
Traverse Point /
Sideshot Point
A distance measurement is carried out to the respective
tie point. Both functions use the same dialog. This
corresponds to the TPS-System 1000 "MEASURE"
dialog. On completion of the measurement, the program
continues either with "MULTIPLE MEAS" or with the
"TRAVERSE MENU" according to the settings in the
configuration.
TRAV\MEAS TRAVERSE PT
14:03
MC
ALL DIST REC TARGT
Easting : ----- m
Northing : ----- m
Elevation : ----- m
F1
F2 F3
F4
F5 F6
HELP I<>II
Point no. : 20
Refl.Height : 1.300 m
Hz : 249°10'20"
V : 90°19'52"
Slope Dist. : ----- m
Height diff : ----- m
Simultaneously measure and record data on the active
recording device.
Measure a distance and record data on the active
recording device.
Measure a distance without recording.
Enter target data as described in chapter "Measure &
Record" of "SYSTEM" - user manual.
Change the theodolite face.
Exit the program.