Filter
Top Products
270 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Select Template point and
offset
The first step in the procedure is to select a point on the
cross section to be staked and enter the offset.
Access the cross section options.
ROAD+\ CROSS SECTIONS
14:03
MC
1L
Chainage : 0.000
Hght. Shift : 0.000 m
Template : +000tutor
∆CL Offset : -1.500 m
∆CL Hgt Diff : -0.030 m
CATCH <- CENTR ->
Stake Offs. : -0.600 m
S.Offset Ht : Horizontal
Offset : 0.000 m
Hght Offset : 0.000 m
F1
F2 F3
F4
F5 F6
HELP PLOT
1L : Indicates the location of the cross
section point in relation to the
centerline. In this example, the "1L"
means the first point of the template
left of centerline.
Chainage : Displays the current chainage.
Hght. Shift : Displays the vertical shift, if any,
applied to the whole alignment.
Template : Displays the template name being
used.
∆CL Offset : Displays the horizontal distance of the
template point from centerline (- for
left)
∆CL Hgt Diff : Displays the difference in elevation of
the template point between the
centerline and the point to be staked.