Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 27
OH
This manual describes the "Orientation and Height
Transfer" program of the TPS SYSTEM 1000
theodolite series.
The instrument must be set up on a known point. The
program "ORIENTATION" calculates an angular
correction for the instruments horizontal circle, so that
0.0000 of the horizontal circle corresponds with grid
north (Orientation correction), using reference points
with known Easting and Northing.
For simultaneous determination of the station elevation,
height of instrument and height of reflector must
already have been input and the elevation of the target
points must be known.
The program handles a maximum of 10 points.
Orientation and Height Transfer
Introduction
E
0°00'00"
HN
PROG_Z01
E0
N0
H0
E
N
H
Hz
∆H