Filter
Top Products
116 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
HP
V : Vertical angle to the hidden point.
Slope. Dist. : Slope distance to the hidden point.
Height Diff : Height difference from instrument
station to the hidden point.
Easting : Calculated Easting (E) for the hidden
point.
Northing : Calculated Northing (N) for the
hidden point.
Elevation : Calculated Elevation for the hidden
point.
Take a new hidden-point measurement.
Store the point calculation on the recording device.
If the prism constant is also stored (depending on the
REC mask) during storing of the calculated data of the
hidden point this value can be ignored because it is not
relevant for the calculation.
Enter target data as described in chapter "Measure &
Record" of "SYSTEM" - user manual.
Call up the CODE function, as described in chapter
"Measure & Record" of "SYSTEM" - user manual.
Proceed to measure a new hidden point.
Exit the program.