Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 295
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Comments:
• The header consists of a single block at the start of a
data file.
• Tangents and the EOP contain “00000NON” in
WI72
• Data units in WI’s 11, and 72 are defined by WI83.
• Tangent and arc lengths may be calculated from the
stationing.
• The stationing is projected onto a horizontal plane.
• If the curve radius point lies above the centerline, the
radius is positive.
• If the curve radius lies beneath the centerline, the
radius is negative.
• An alignment file must contain at least two elements.
• There is no limitation on the size of the V-alignment
file. As a result, as many data blocks as you like can
be entered if a file is created on the PC using the
DOS program "ROADDATA.EXE". If a file is
created/edited using the program "FILE EDITOR"
on the TPS1000 there is a limitation of 200 data
blocks.
Example of a vertical alignment file:
41....+0EXAMPLE 42....+0VALIGNM 43....+STACOORD
11....+00000000 71....+STRAIGHT 72....+00000NON
83..10+00400000
11....+00300000 71....+0PARABOL 72....-01142932
83..10+00422500
11....+00500000 71....+STRAIGHT 72....+00000NON
83..10+00420000
11....+00550000 71....+0PARABOL 72....+02091126
83..10+00415000
11....+00850000 71....+STRAIGHT 72....+00000NON
83..10+00406522
11....+01127904 71....+00000EOP 72....+00000NON
83..10+00418605