Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 189
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
RO
Deflct.Tol. : Permissible deviation of the tangent
directions for adjacent elements. A
message appears if this value is
exceeded. The input is always in
milligon.
ChaingeTol. : Permissible deviation of the (chord)
length of an element and of the
distance calculated from the end-point
coordinates, expressed in the length
units set. A message appears if this
value is exceeded.
3D Stake : ON for setting out positions and
heights. The height can be set out only
if the V-alignment has been defined.
OFF for setting out only positions.
Neither a V-alignment nor a typical
cross-section can be set out.
Log File : Set to ON, the program will record
measurement data in a log file in the
format described on page 190.
Log FlName : Enter the log file name.
Displays date and version of the program.
Sets standard values . The values are displayed in
dialog on page 188.
Accepts and stores parameters displayed. Continues to
display "SELECT ALN FILES".