Filter
Top Products
132 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
Select alpha-numeric/numeric input.
Exit the program.
Proceed to the "MEASURE" dialog (displayed below).
F1
F2 F3
F4
F5 F6
HELP I<>II
SETS\ FIRST SET
14:03
MC
ALL DIST REC TARGT EDIT
Point no. : 501
Refl.Height : 1.300 m
Hz : 249°10'20"
V : 90°19'52"
∆HZ : -----
∆V : -----
∆∆
∆∆
∆Hz /
∆∆
∆∆
∆V : Are not activ during the first set. The
differences are shown for all further sets
relative to the measurements of the first
half set.
This "MEASURE" dialog is shown during the
measurement to targets. The program return to the
dialog "FIRST SET" (page 131) on completion of a
measurement or to the "FURTHER SET" dialog (page
133).
Simultaneously measure and record data on the active
recording device. Return to the dialog "FIRST SET".
Measure and record a distance.
1
Measure without recording the measurement on the
active recording device.
Enter the target data. For further information refer to
chapter "Measure & Record" of the "SYSTEM" - user
manual.
Change the theodolite face.
Proceed to "FIRST SET".
1
Distance measurement is optional.