Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 253
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Call up the "Configuration-Editor".
Before selecting the alignment files to use, you should
enter the configuration parameters for the job.
6. Stake the point and record the data.
7. Choose another point on the cross-section and stake
it out.
8. When all selected points on the cross section have
been staked, enter a new station and repeat steps 5-7.
In the sections that follow, the operation of the program
will be covered in more detail. The concepts of the
program will be covered to assist you in becoming
proficient with the "ROADPLUS" program for normal
everyday operation such as staking a project with the
ROAD+\ SELECT ALN FILES
14:03
MC
Horiz.Aln. : ALN_EX1
Vert. Aln. : PRF_EX1
Cross Secs : CRS_EX1
Crs.Assign : STA_EX1
Station Eq : EQN_EX1
Log FlName : ROADPLUS.LOG
LIST
F1
F2 F3
F4
F5 F6
HELP CONF
Getting Started
Before starting the program, enter the setup information
for the location of the theodolite and orient the
instrument to the reference point.
From the "MAIN MENU: PROGRAMS" display, move
the highlighted cursor to the "ROADPLUS" program
and press on the keyboard of the instrument. This
will bring up the "SELECT ALN FILES" display.
The display illustration examples contain text and
values for example purposes only. The actual values
you will see on the display of your instrument will be
different.