Filter
Top Products
336 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
DE
MO
Selecting points
The points to be measured are selected from this menu:
• by storing the appropriate measurement file, points
already measured at the same station
• by entering the LEARNED file, points yet to be
determined.
MONIT\ POINT SELECTION
14:03
MEAS SELCT LIST
HELP
MC
Control : LEARNED
Total Pts. : 24
Select Pts. : 24
Two Faces : YES
To learn points, the "LEARNED" file must be used as a
control file.
To use points from another file, use (LIST) to
switch to the file selection und wählen die gewünschte
Datei.
The point file must:
• be in the GSI directory on the PCMCIA card,
• include the point numbers and the angle
measurements.
The instrument itself must have been positioned.
With the "Two Faces" option you can alternate between
one-face and two-face measurement.
If you choose the two-face option, every single
measurement is stored on the PCMCIA card.
Calls the measurement menu, for first-time point
measurement.
Calls the point selection.
Selects from the list of GSI files.
F1
F2 F3
F4
F5 F6