Filter
Top Products
© Leica TPS-System 1000 Programs-2.3.1en 201
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
RO
• Cross sections
The points in the cross section are defined in
accordance with:
- the centre-line offset sCLO (neg.: pt. left / pos.: pt.
right) and
- the height difference sH related to the alignment
point (neg.: pt. lower / pos.: pt. higher than
alignment)
The template file is structured as follows:
1. Header
2. Data block: Cross section 1 / point no. 1
3. Data block: Cross section 2 / point no. 2
4. Data block: Cross section 3 / point no. 3
.....
n. Data block: Cross section x / point no. y
Element Defined by: Declaration
Height difference Planned height difference
with respect to alignment
-
Centerline offset Planned centre-line offset -
Aspect:
chainage increasing
PROG_Z24
2
1
3
4
5
left right
alignment
sCLO (pos.)
s∆H (neg.)