Leica 1000Z01 Model Vehicle User Manual


 
© Leica TPS-System 1000 Programs-2.3.1en 285
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
LB
TB
CO
RP
Slope Staking
Slope staking involves determining a point where the
cross section template meets the ground surface. This
point of zero cut/fill is found primarily by trial and error
and a lot of computing. The following diagram
illustrates the concepts of slope staking.
The slope staking routine is accessed from the "CROSS
SECTIONS" display.
Centerline
Centerline
RPLUS12
CL Offset
CL Offset
Catch Point
Cross
Section
Cross
Section
FILL
Catch Point
CUT
Plan View
Plan View
0+200.000
0+200.000
Chainage
Chainage
XS Hgt Diff
XS Hgt Diff