Filter
Top Products
180 TPS-System 1000 Programs-2.3.1en © Leica
IV
EL
AH
OH
BS
SM
AS
FS
BL
HB
KM
FB
SA
PZ
RO
Cross sections
• Selecting points in the cross section
For setting out, points on the defined cross section can
be selected.
ROADL\ CROSS SETIONS
14:03
MC
<-- <-- CENTR --> -->
Hght. Shift : 0.999999 m
1R*
Chainage : 100.000
Cross Sect. : +TMPL0001
∆CL Offset : 0.000 m
∆CL HGTDiff : 0.000 m
Offset : 3.000 m
HghtOffset : 0.000 m
F1
F2 F3
F4
F5 F6
HELP PLOT
1R : Numbering the profile points from the
centre line outwards: 1L, 2L, 3L, etc.
for points to the left; 1R, 2R, 3R etc.
for points to the right. The centre of
the cross-sectional profile is numbered
0C. Points already set out are marked
* . The display bar displays in
graphical form the position of the
point in the profile.
Chainage : Chainage currently valid.
Cross Sect. : Name of the valid cross section. A
different profile can be searched for.
∆∆
∆∆
∆CL Offset : Horizontal distance from the centre of
the profile to the current profile point.
∆∆
∆∆
∆CL Hgt Diff : Vertical distance from the centre of
the profile to the current profile point.