Filter
Top Products
IV
EL
AH
OH
RE
42 TPS-System 1000 Programs-2.3.1en © Leica
Measure Mode
This dialog is similar to the TPS System1000’s basic
"Measure Mode" dialog. Once a measurement is taken,
the program will return to the dialog "Target Point" to
acquire the next point for measuring.
F1
F2 F3
F4
F5 F6
HELP I<>II
RESEC\ MEASURE MOD (GSI)
14:03
Point no. : 1
Hz : 286°55'50"
V : 91°16'20"
Refl.Height : 0.000 m
Slope Dist. : ----- m
ALL DIST REC TARGT αNUM
I
MC
Simultaneously measure and record data on the active
recording device. Return to the dialog "TARGET
POINT".
Measure a distance.
Record the measurement on the active recording device.
Return to the dialog "TARGET POINT".
Enter target data as described in chapter "Measure &
Record" of the "System" - user manual.
Assigned with "aNUM" at point number input; assigned
with "EDIT" at numerical input.
Change the theodolite face.
Call up the CODE function, as described in chapter
"Measure & Record" of the "System" - user manual.
Exit the program.
Accept the measurement and return to the dialog
"TARGET POINT".